Cem-Kote Barrier Cote 100TM is a high performance, heavy duty waterproofing cement coating- thin topping. It is designed for a variety of uses in waterproofing, resurfacing of high traffic areas, or areas with high impact or abrasion resistance requirements.
MANUFACTURER: Gemite Products Inc.
PRODUCT DESCRIPTION
Basic Use
Cem-Kote Barrier Cote 100TM is a high performance, heavy duty waterproofing cement coating- thin topping. It is designed for a variety of uses in waterproofing, resurfacing of high traffic areas, or areas with high impact or abrasion resistance requirements such as in parking garages, industrial floors, loading docks and many others.
Composition and Materials
Cem-Kote Barrier Cote 100 is a high performance, Portland cement based material. It is a two component system consisting of dry powder blend (Component A) and a liquid additive, (Component B). For additional tensile strength and crack bridging, it is reinforced with the Reinforcing Fabric HD. Cem-Kote Barrier Cote 100 exhibits an excellent bond to clean, structurally sound concrete, substrate crack spanning, weather and freeze/thaw resistance.
Limitations
Do not apply Cem-Kote Barrier Cote 100 when the temperature is expected to be below 40oF (4oC) within 48 hours or when rain is imminent. Follow “hot concreting” procedures when applying Cem-Kote Barrier Cote 100 at temperatures exceeding 77oF (25oC).
Health and Safety
Cem-Kote Barrier Cote 100 is non-toxic. Your skin might be sensitive to hydraulic cement or the liquid additive. We recommend use of rubber gloves. Avoid contact with eyes and prolonged contact with skin. If contact occurs, flush immediately with water. Seek medical advice if irritation occurs. Harmful if digested. Keep product out of reach of children. For industrial use only. Consult MSDS for additional information.
10.3 – 11.0 MPa (1,500 – 1,600 psi)
Ultimate Tensile Stress
Compressive Strength (ASTM C109)
34.5 -34.0 MPa (5,000 -5,500 psi)
Freeze-Thaw Resistance (ASTM C666, Procedure A)
0% weight loss after 300 cycles
Direct Tension Bond
1.0 – 3.5 MPa (150 – 500 psi) Failure in concrete substrate
Resistance to Chloride Penetration (AAH- STO T259)
no chloride penetration
Resistance to Chloride Penetration (AASHTO T277)
300-400 Coulombs
Salt Scaling Resistance (MTO Ontario, Form 1351)
Please fill in the details of your order in the fields below and one of our agents will be in touch with you shortly.