Cem-Kote CW Plus

Cem-Kote CW Plus is a crystalline (capillary) in -depth waterproofing for new or existing water storage & treatment concrete structures,di -gesters, clarifiers and utility vaults. It is suitable for water-proofing of retaining walls, basements, concrete slabs, swimming pools and others.

MANUFACTURER: Gemite Products Inc.

PRODUCT DESCRIPTION

Basic Use

Cem-Kote CW Plus is a crystalline (capillary) in-depth waterproofing for new or existing water storage & treatment concrete structures, digesters, clarifiers and utility vaults. Cem-Kote CW Plusis suitable for waterproofing of retaining walls, basements, concrete slabs, swimming pools and other concrete structures.

Composition and Materials

Cem-Kote CW Plus is one component (add water only), Portland cement based coating (slurry), containing silica based materials.

Limitations

Cem-Kote CW Plus is a fast setting material. Under the normal conditions it should be applied within 15-30 minutes after mixing.

Health and Safety

Cem-Kote CW Plus is non-toxic and non-flammable. Your skin might be sensitive to cement. We recommend use of rubber gloves. Avoid contact with skin. If contact occurs, flush immediately with water. Seek medical advice if irritation occurs. Harmful if digested. Keep product out reach of children.FOR INDUSTRIAL USE ONLY. Consult MSDS for additional information.

  • Approved ANSI/NSF Standard 61- Barrier Materials
  • Negative or positive side waterproofing
  • Permanently active (in-depth)
  • Seals cracks up to 0.3 mm
  • Fast cure waterproofing (48 hours)
  • Approved for potable water tanks (>10,000 USG-38m3
  • Waterproofs highly porous concretes
  • Non-flammable
  • One component (add water only)
  • More economical than competitive products
  • Inorganic & Environment friendly
  • Long working time – 30 minutes plus
ITEM
SPECIFICATION

Compressive Strength (ASTM C109 Modified)

51.7 – 62.1 MPa (7,500 – 9,000 psi)

Modulus of Rupture (ASTM C348) 28 days

8.9 – 10.2 MPa (1,290 – 1,540 psi)

Bond Strength with Concrete (Pull off test)

Greater than the tensile strength
of the concrete substrate

Water Vapor Permeance 3 mm (1/8 in) thickness

1.8 metric perms

Hydraulic Permeability

Concrete block coated with Cem-Cote CW Plus withstands 156 m (500 ft) water head pressure

Please fill in the details of your order in the fields below and one of our agents will be in touch with you shortly.

Name (required)

Email (required)

Telephone(required)

Quantity

Your Message

Leave a Reply

Your email address will not be published. Required fields are marked *