Rustproofing primer (slurry) for reinforcing steel in concrete. Fibre-Prime provides an excellent profiled surface, unlike smooth and non absorbent epoxy, allowing easy overhead or vertical application of repair mortar or shotcrete.
Manufacturer: Gemite Products Inc.
Basic Use
Rustproofing primer (slurry) for reinforcing steel in concrete. Fibre-Prime provides an excellent profiled surface, unlike smooth and non absorbent epoxy, allowing easy overhead orvertical application of repair mortar or shotcrete.
Composition and Materials
Fibre-Prime is a two component material, consisting of a dry Component A and a liquid Component B. Fibre-Prime contains highly effective migrating corrosion inhibitors active on both, anodic as well as cathodic corrosion sites.
Limitations
Do not apply Fibre-Prime when the temperature is expected to be below 40F (4C) within 24 hours or when rain is imminent. Consult the manufacturer for applications over previously treated steel surface.
Health and Safety
Fibre-Prime is non-toxic and non-flammable. Your skin might be sensitive to cement. We recommend use of rubber gloves. Avoid contact with skin. If contact occurs, flush immediately with water. Seek medical advice if irritation occurs. Harmful if digested. Keep product out reach of children. FOR INDUSTRIAL USE ONLY. Consult MSDS for additional information.
- Rustproofs Reinforcing Steel
- Contains Migrating Corrosion Inhibitors
- Active on Anodic and Cathodic sites
- Reduces rebound of shotcrete
- Allows an easy overhead patching
- Self-curing
- Economical
- Hard and durable
- Superior adhesion
- Bonds to wet steel
- Crack resistant
- Excellent freeze/thaw durability
- Waterborne = VOC Compliant
- Non-toxic
- Easy to Apply
Compressive Strength (ASTM 109 Modified)
41.0-43.0 MPa (5940-6230 psi)
Adhesion to steel (Direct Tension Pull Off)
2.6-3.5 MPa (380-500 psi)
Freeze/Thaw Resistance (ASTM C666-A)
0% loss
Resistance to Chloride Penetration (AASHTO T277)
430-520 Coulombs
Carbonation Resistance (R), 1.5 mm thick layer , Klopfer (R>50 m)
Equivalent air thickness R=1280 m Equivalent concrete thickness (assume ì concrete = 400) 3.2 m
H2S Resistance (Gemite ISO TP 012)
Very good – for excellent resistance, over-coat with Cem-Kote Flex CR
Cathodic Disbondement (CSA – Z245)
No disbondment
Please fill in the details of your order in the fields below and one of our agents will be in touch with you shortly.
ABOUT US
OGMT provides complete structural waterproofing and damp proofing solutions for buildings (new and refurbished) and infrastructure..